·  A basic yet fully functional starter kit for small quantities.

·  Ideal for batch size is from 50 g to about 150 g.

·  Can be upgraded to a full size bench-top system later to allow development with larger batch sizes.

·  Extruder 20 with reduced height screen assembly.

·  One reduced height extruder screen with 1.0mm holes.

·  MBS spheronizer base with 120 mm bowl.

·  Two spheronizer discs 6x6 mm and 3x3 mm cross hatch pattern.

·  A standard starter kit designed to work with standard development batch sizes. 

·  The spheronizer batch size is from 100 g to about 1000 g.

·  Can make about 8-10kg of pellets per hour.

·  Extruder 20 with full height screen assembly.

·  One screen with 1.0 mm holes.

·  MBS spheronizer base with 250mm bowl.

·  One 6x6 mm cross hatch pattern spheronizer disc

·  More advanced operation and process controls.

·  Additional Extruder screens are included to facilitate the development of pellets of different sizes.

·  A heating or cooling water jacket on spheronizer for product requiring heating or cooling.

·  Automatic run timer for experimental repeatability.

·  The provision of a “fines air” unit on the spheronizer to minimise dust generation.

·  Extruder 20 with full height screen assembly.

·  Three extruder screens with hole sizes:- 0.8 mm, 1.0 mm and 1.2 mm.

·  MBS spheronizer base with 250mm bowl.

·  Spheronizer bowl heating/cooling jacket.

·  Spheronizer automatic run timer.

·  Spheronizer fines air.

·  An Extruder 20 with full height screens with different diameter holes and the facility to collect operational data to a computer.

·  Three extruder screens with hole sizes:- 0.8 mm, 1.0 mm and 1.2 mm

·  An MBS/250 spheronizer with a cooling jacket and enhance control system and the ability to collect operational data to a computer