Email: info@caleva.co.uk

Our Products

Download Area

Caleva Worldwide

Site map

You are here: Home » Our Products » Extrusion and Extruders » Floor standing pilot scale extruders » Floor standing pilot plant and full production screen (basket) Extruder 35

Floor standing pilot plant and full production screen (basket) Extruder 35

Floor standing production-scale Gear Extruder 40

A general brochure about Caleva and its products can be downloaded from here...

Spheronisation, Pelletisation and Marumerisation all mean the same thing. The manufacture of small round pellets with a limited size spread within a batch. Pellet sizes (sometimes called micropellets or spheroids) can be normally be made within tight size ranges between about 0.5mm and 2.0mm in diameter.

Pilot plant development and full production screen extruder for pharmaceutical material.

The Caleva "Low-Pressure" production Extruder 35 for extrusion up to about 180kg/hr


	Automatic loading model with 20 litre capacity loading hopper. We can design according to your needs.

Extruder with working capacity suitable for the Caleva Spheronizer 380 or Spheronizer 500.
Designed for pilot plant and full-scale production.
Very small quantities (about 0.5kg) can be extruded during development work.
Easy to dismantle and clean.
Full IQ/OQ documentation packages available.
Operator changeable screens with different hole diameters available allowing different diameter extrudate.
Automatic loading option if required.
Full Datastor™ compatibility.


	Manual loading model

Downloads

To download a "Product Information Sheet" with more information about the production and pilot scale extruder 35
click here....

To download information about the companion "Datastor" for the collection and recording of product temperature and operating parameters
click here....

Extrusion screen

Extruder screens can be offered with 0.5 to 2.3mm diameter holes.

Custom controls

Controls and control layout can be according to customer specification.

Data collection

Operation parameters can be recorded and stored as required with "Datastor".

We are worldwide

Caleva can supply, service and support its extruders and spheronizers worldwide.

Caleva Process Solutions Ltd
Butts Pond Industrial Estate, Sturminster Newton, Dorset, DT10 1AZ, UK
Tel: +44(0) 1258 471122 Fax: +44(0) 1258 471133
Registered in England & Wales No. 3073156 VAT Registration No. GB892206321