Equipment for working with very small quantities

Email: info@caleva.co.uk

Home

Extruders and Spheronizers (Production & Laboratory)

Other Caleva Laboratory Equipment

Caleva Worldwide

Site map

You are here: Home » Home » Laboratory development » Equipment for working with very small quantities less than 100g)

Laboratory development (batches of about 100grams to a few kilos)

Equipment for working with very small quantities less than 100g)

Product Development Kits

A general brochure about Caleva and its products for extrusion and spheronization can be downloaded from here...

Terminology:

Spheronisation™*, Pelletisation and Marumerisation all mean the same thing. The manufacture of small round pellets with a limited size spread within a batch. Pellet sizes (sometimes called micropellets or spheroids) can be normally be made within tight size ranges between about 0.5mm and 2.0mm in diameter.

* = Sometimes called: Spheronization or spheroidization.

Trade Marks:
Spheronization™ was a term originally coined by Caleva Process Solutions and used by Caleva as a Registered Trade Mark. It is still used as a trade mark of Caleva Process Solutions and other uses are prohibited.

"Caleva" is a registered trade mark of Caleva Process Solutions Ltd and its use without permission is prohibited.

The company "GB-Caleva" has no connection with Caleva Process Solutions

Caleva product quality? please look here...

Laboratory development with very small sample sizes

If you need to work with very small samples Caleva has a range of suitable equipment for laboratory development work.

The Caleva Mixer Torque Rheometer
- Develop new formations with a minimum material.
- Monitor the effect of batch variation on formulation consistency.
- Quality assurance in production
  For more go here...
The Caleva Mini Screw Extruder
- Normal batch or sample sizes from 5g to 100g grams of material.
  For more go here...
The Caleva Multi Bowl Spheronizer with a 120mm bowl and inserts
- Spheronize samples from as small as 1g .
  For more go here...
The Caleva Mini Coater/Drier.
- Dry and coat from a few grams of spheroids.
  For more go here...

The Caleva Mini Coater Drier for a few tablets (1 to 150) or a few grams of pellets made from Caleva extruders and spheronisers

The Caleva Mixer Torque Rheometer

Small sample size extruder. Extrudate from the Mini Screw Extruder.

The MBS (Multi Bowl System) Spheronizer with a 120 bowl attached.

Caleva^© Process Solutions Ltd
Butts Pond Industrial Estate, Sturminster Newton, Dorset, DT10 1AZ, UK
Tel: +44(0) 1258 471122 Fax: +44(0) 1258 471133
Registered in England & Wales No. 3073156 VAT Registration No. GB892206321